|
|
Sandy Brae Laboratories, Inc.Water Test Kits |
||
|
|
|
|
|
|
|
|
|
|
Tested and approved by Mobil Research and Development |
|
|
|
|
|
||
|
No Water! |
NEW: Now used to test water content in Biodiesel and SVO (vegetable oil). Water in lubricating fluids can cause serious damage to machinery with premature failure of bearings, gears, pistons and other components. Major bearing manufacturers claim that as little as .05% water in the oil will reduce bearing life by as much as 60%. Until now, there hasn't been an easy and convenient way to determine water content on-site. Samples have always been sent to the lab while the people in the field waited for the test results. Now, the Water Test Kit can be used to determine the percentage of water in various fluids right at the machinery's location. Test results are available in as little as five minutes. Typically these fluids are hydraulic fluids, gear oils and other circulation system lubricants. Not only can these fluids be tested, but others can also be tested. The maximum range of the gauge is 1.5% water, but lower or higher concentrations (.50% or 50% Full Scale) can be tested using the laboratory techniques listed in the operating manual. With a resolution of 0.001% (10 PPM) water, any fluid can be tested as long as the following conditions are met: · A. The water must be in the form of free molecules or droplets and not be chemically or physically bound as in an emulsion. · B. The fluid should not attack the water vessel components which are anodized aluminum and brass. · C. Most importantly, the fluid testing must not have a flash point below 140o F. The Water Test Kit, # 01-WTK-DELUXE, contains the water test vessel, one box of Calcium Hydride (Reagent A), Reagent B (3 pints), a 10 and 30 milliliter syringe, wash bottle, safety glasses, box of disposble gloves, scissors, and instructions. The Deluxe Digital Water Test Kit has the part # 01-WTK-DELUXEDP. |
||
|
|
|
||
Updated: 03/06/2008 |
Copyright @ 4/11/00 Sandy Brae Laboratories, Inc. For more information contact office@sandybrae.com |
||